Kegmaster Series X - Single-Tap Kegerator
Have you been looking for a machine that will allow you to pour ice-cold schooners in the comfort of your home? Well look no further, the Kegmaster Series-X is the answer to all your problems.
- 1. 15% faster cooling
- 2. 10% better energy efficiency
- 3. Holds 4 x 19lt kegs instead of 3 and 3 x 20L kegs rather than 2
-
- Keg Fridge
- Stainless Steel Font (cylinder for taps)
- Beer/gas lines
- Gas bottle
- Fittings
- Taps
-
- 600mm Wide
- 650mm Deep
- 840mm Height
- 890mm Height of the fridge part (including castor wheels but excluding the height of guard rail, drip tray or font)
Home Brew Kegs:
-
- All of our kegerators come fully equipped and ready to go for homebrew purposes. The disconnects that come with the kegerators are for the 19L ball lock kegs, not commercial beer kegs.
- The Kegmaster series-X will fit up to 4 x 19lt Ball-Lock (Cornelius) kegs. So if you feel as if you’re a bit of a home-brew connoisseur and you’ll have a variety of home-brew blends then why not maximise the use of your Kegerator and have a tap for every keg with our Kegmaster Series-4 Quadruple tap.
- All of our kegerators come fully equipped and ready to go for homebrew purposes. The disconnects that come with the kegerators are for the 19L ball lock kegs, not commercial beer kegs.
- For more information click here to view our Kegerator Information page
Commercial Kegs (VB, Carlton, Great Northern, etc):
-
- For all commercial kegs, you will require the correct commercial keg coupler to suit your desired brand of beer. To ensure that you are getting the correct coupler for your favourite beer click here for our Kegerator Information page.
Note:
-
- Kegerator must be assembled. Download the instruction manual below or contact our support team for assistance on assembly.
- Instruction Manual.PDF
Warranty
-
- All Kegerators are covered by 12 Months Warranty
QUESTIONS & ANSWERS
Ask a Question-
Can the font be fed through a bench top and the fridge left under a bar
Yes, it definitely can as long as the top of the fridge is insulated to the bottom of the bench top with silicone and you leave a 10mm space for insulation between the bottom of the bench and the top of the fridge.
-
How long does this take to set up?
Setting up the Kegmaster Series-X can take anywhere between 30min-90min depending on your experience with tubes and fittings.
-
Does this product come preassembled?
This product does not come preassembled, although set up is very straight forward.