Kegmaster Series X - Double-Tap Kegerator
- Beer/gas lines
- Gas bottle
For a detailed list of what's included click here
Home Brew Kegs:
- All of our kegerators come fully equipped and ready to go for homebrew purposes. The disconnects that come with the kegerators are for the 19L ball lock kegs, not commercial beer kegs.
- The Kegmaster series-X will fit up to 4 x 19lt Ball-Lock (Cornelius) kegs. So if you feel as if you’re a bit of a home-brew connoisseur and you’ll have a variety of home-brew blends then why not maximise the use of your Kegerator and have a tap for every keg with our Kegmaster Series-4 Quadruple tap.
Commercial Kegs (VB, Carlton, Great Northern, etc):
For all commercial kegs, you will require the correct commercial keg coupler to suit your desired brand of beer. To ensure that you are getting the correct coupler for your favourite beer click here for our Kegerator Information page.
- 600mm Wide
- 640mm Deep
- 840mm Height
Kegerator must be assembled. Download the instruction manual below or contact our support team for assistance on assembly.
- All Kegerators are covered by 12 Months Warranty
QUESTIONS & ANSWERSAsk a Question
Hi I’m looking at purchasing the Keg Master Series X Kegerator Double Tap for an outdoor deck area. If i just order this online now will it come with all the required equipment like which gas cylinder do I get? What type of coupler?
Our kegerators come fully equipped with everything you need for homebrew inluding a 2.6kg C02 gas cylinder.
The only additional purchase you'll need to make for commercial keg use are the couplers. Below is a list of the beer brands that are compatible to each coupler. You will need to purchase 1 coupler per tap in use.D type coupler:
4 PinesA type Coupler:
Bundaberg & Cola
Young HenrysAs you can see the big brands are split down the middle between the A and D type couplers. You can operate up to three 20L commercial kegs at once in our series X triple or quadruple tap kegerators, therefore it may be best to purchase 1 of each coupler so you don't miss out on any of the above beer brands. Alternatively if you're set on your favourite beer brand it would be in your best interest to purchase the same coupler for all of the taps. These couplers are easy to attach and detach you would just have to make sure that the appropriate beer brand is attached to the appropriate coupler.